Precision Extruded Tubing
0.10 – 23.00 mm
PEEK
Polyetheretherketone
A high-temperature polymer for sustained use at 250 °C. It goes into orthopaedic and spinal instruments and high-temperature insulation.
Published specifications
Values as published by the principal, with a source on every row. Family-typical figures are not included.
| Property | Value | Source |
|---|---|---|
| 연속 사용 온도 | 250 ℃ | Principal brochure |
| 길이 | No limit | Principal Company Profile |
| 생체적합성 | ISO 10993-5 · ISO 10993-10 | Principal Company Profile |
Classification · use · equipment
Where this material sits in the line and what it is used for.
- 18 extrusion lines · screw 0.75″–2.00″
- Over 10 years, volume production since 2015
PEEK is used in
The range differs by item. You can see which item covers the dimensions you need.
PEEK Tubing
0.10 – 23.00 mm
Multi-lumen Tubing
0.10 – 10.00 mm
Braided Reinforced Tubing
1.7 – 39 Fr
Coil Reinforced Tubing
1.7 – 39 Fr
Heat Shrink Tubing
4 specifications
Ask and we will confirm it
The items below are not published by the principal. If you need them for a design, ask and we will obtain them.
High-temperature — other materials
All materialsOnce the material is set, the dimensions are enough
Give ID, OD, wall, length and lumen count, and we come back with feasibility in that material, domestic lead time and a KRW quotation.