Multi-lumen Tubing
0.10 – 10.00 mm
PTFE
Polytetrafluoroethylene
The reference material for catheter liners. Low friction, but non-polar — it will not bond to anything, which is why surface treatment comes with it.
Published specifications
Values as published by the principal, with a source on every row. Family-typical figures are not included.
| Property | Value | Source |
|---|---|---|
| 최소 벽두께 | 0.01 mm, coating process | Principal Company Profile |
| 표면처리 접촉각 | 110° → 46°, before / after plasma etching | Principal brochure |
| 에칭 유지 | Over 12 months · restored by secondary etching | Principal brochure |
| 멸균 | Autoclave · EO | Principal Company Profile |
Classification · use · equipment
Where this material sits in the line and what it is used for.
- Extrusion, co-extrusion and coating
- 10 PTFE tubing lines
PTFE is used in
The range differs by item. You can see which item covers the dimensions you need.
Braided Reinforced Tubing
1.7 – 39 Fr
Coil Reinforced Tubing
1.7 – 39 Fr
PI Braided Sheath
0.10 – 4.00 mm
Steerable Sheath
3 – 36 Fr
PTFE Liner
7 specifications
Coil Sheath & Dilator
8 specifications
Braided Sheath & Dilator
8 specifications
Guiding Catheter
5 – 8 Fr
Angiographic Catheter
15 specifications
Urinary Negative Pressure Sheath
9.5 – 14 Fr
Microcatheter
4 specifications
Guidewire
4 specifications
PTFE Etched & Secondary Etched
Min wall 0.01 mm
Ask and we will confirm it
The items below are not published by the principal. If you need them for a design, ask and we will obtain them.
Fluoropolymer — other materials
All materialsOnce the material is set, the dimensions are enough
Give ID, OD, wall, length and lumen count, and we come back with feasibility in that material, domestic lead time and a KRW quotation.