Precision Extruded Tubing
0.10 – 23.00 mm
PEBAX
Polyether block amide
Durometer is stepped to build a stiffness gradient along the shaft. The mainstay for balloons and reinforced-tubing jackets.
Published specifications
Values as published by the principal, with a source on every row. Family-typical figures are not included.
| Property | Value | Source |
|---|---|---|
| 열수축 수축비 | 2 : 1 | Principal Company Profile |
| 수축 온도 | 180 – 190 ℃ | Principal Company Profile |
Classification · use · equipment
Where this material sits in the line and what it is used for.
- Balloon · reinforced tubing jacket · catheter shaft
PEBAX is used in
The range differs by item. You can see which item covers the dimensions you need.
Multi-lumen Tubing
0.10 – 10.00 mm
Braided Reinforced Tubing
1.7 – 39 Fr
Coil Reinforced Tubing
1.7 – 39 Fr
PI Braided Sheath
0.10 – 4.00 mm
Steerable Sheath
3 – 36 Fr
Balloon Tubing
0.20 – 18.00 mm
Heat Shrink Tubing
4 specifications
Coil Sheath & Dilator
8 specifications
Braided Sheath & Dilator
8 specifications
Guiding Catheter
5 – 8 Fr
Angiographic Catheter
15 specifications
Urinary Negative Pressure Sheath
9.5 – 14 Fr
Microcatheter
4 specifications
Ask and we will confirm it
The items below are not published by the principal. If you need them for a design, ask and we will obtain them.
Elastomer — other materials
All materialsOnce the material is set, the dimensions are enough
Give ID, OD, wall, length and lumen count, and we come back with feasibility in that material, domestic lead time and a KRW quotation.