octudex
KOENRequest a Sample
Elastomer

TPU

Thermoplastic polyurethane

열가소성 폴리우레탄

Thermoplastic polyurethane appears as a component material in 12 items below. Each item’s capability range is a confirmed value.

Property data for this material comes on request

Properties for this polymer on its own are not yet published. The dimensional ranges of the items below are published values, so start there.

Classification · use · equipment

Where this material sits in the line and what it is used for.

코팅 용도
Electrodes · catheters · urinary catheters and stents
다공성 PU
ePTFE replacement coating
전용 설비
2 hydrophilic coating lines

TPU is used in

The range differs by item. You can see which item covers the dimensions you need.

CDMO custom

Precision Extruded Tubing

Body

0.10 – 23.00 mm

CDMO custom

Multi-lumen Tubing

Body

0.10 – 10.00 mm

Wall 0.01 – 0.10 mm

CDMO custom

Braided Reinforced Tubing

Jacket · Liner

1.7 – 39 Fr

CDMO custom

Coil Reinforced Tubing

Jacket · Liner

1.7 – 39 Fr

CDMO custom

PI Braided Sheath

Jacket

0.10 – 4.00 mm

Wall 0.01 – 0.15 mm

CDMO custom

Steerable Sheath

Jacket

3 – 36 Fr

CDMO custom

Balloon Tubing

Body

0.20 – 18.00 mm

Wall 0.05 – 1.00 mm

CDMO custom

UHMWPE Liner

Component material

ID 3.41 mm × wall 0.03 mm

OEM finished

Coil Sheath & Dilator

Component material

8 specifications

OEM finished

Braided Sheath & Dilator

Component material

8 specifications

OEM finished

Urinary Negative Pressure Sheath

Component material

9.5 – 14 Fr

CDMO custom

TPU Coating

Component material

By consultation

Not yet available

Ask and we will confirm it

The items below are not published by the principal. If you need them for a design, ask and we will obtain them.

Tensile strength · elongation

Request

Coefficient of friction

Request

Burst pressure

Request

Moisture vapour and gas permeability

Request

Shelf life

Request

Property change after gamma and e-beam irradiation

Request

Elastomer — other materials

All materials
PEBAXPU

Once the material is set, the dimensions are enough

Give ID, OD, wall, length and lumen count, and we come back with feasibility in that material, domestic lead time and a KRW quotation.