High Pressure Braided Tubing · PTCA · PCI

High Pressure Braided Tubing

The high pressure line that injects contrast media and drug solutions during PTCA, PCI and angioplasty — also called high pressure monitoring tubing. A braided reinforcement layer holds the burst pressure and the shape.

Linstant published dataPressure rating to drawing
Application
Contrast injection
PTCA · PCI
Reinforcement
Braid
Metal or fibre
Burst pressure
To drawing
Burst rating
Connector
To specification
Luer, etc.
Request a quote · TDSSee properties
High pressure braided tubing — assembled with luer connectors
Close-up of the braid layer inside a clear jacket
Braid layer close-up — visible through the clear jacket

Characteristics

Properties
Linstant published data
A braided reinforcement that holds injection pressure — metal or fibre braid between two layers gives burst pressure and column strength.
Little pressure is lost in transfer — the bore changes very little under pressure, so injector pressure arrives intact.
It holds its shape — repeated pressurisation and release do not balloon or kink the line.
PTCA, PCI and angioplasty — used to inject contrast media and drug solutions during the procedure.

Length, connector specification and pressure rating are built to drawing. General braid ranges are on the Braid and coil reinforced tubing page.

FAQ

FAQ

What is the pressure rating?

Designed for contrast injector service (e.g. 1,200 psi class). Send working and burst pressure and we tune the braid.

Can it come with connectors assembled?

Yes. Luer lock and rotating connectors can be assembled; send a drawing or standard part number.

Can I get the MSDS · TDS · biocompatibility report for High Pressure Braided Tubing?

Yes. TDS · MSDS come with every specification reply. ISO 10993 biocompatibility data varies by grade and lot, so we confirm it with the factory (Linstant) and reply.

What about samples, MOQ and lead time for High Pressure Braided Tubing?

Standard sizes start with small sample lots. MOQ and lead time depend on dimensions, material and secondary processing — send OD · ID · wall · tolerance · length · quantity and we reply within one business day.

Other items

Full index →
Precision Extruded TubingPrecision Extruded TubingBraided tubingBraided & Coil ReinforcedPI braided tubingPI Braided Reinforced SheathMedical Heat Shrink TubingMedical Heat Shrink TubingPEEK tubePEEK TubingPI Tubing (Polyimide)Polyimide TubingPTFE linerPTFE LinerUHMWPE linerPFAS-free PTFE ReplacementBalloon TubingBalloon TubingSteerable SheathSteerable SheathMicrocatheterMicrocatheterGuiding catheterGuiding CatheterAngiographic CatheterAngiographic CatheterNegative Pressure Access SheathNegative Pressure SheathEndoscope Insertion TubeEndoscope Insertion TubeFluoropolymer Medical TubingFluoropolymer Medical TubingBiopsy ChannelBiopsy Channel
Contact

Send us a specification
and we answer feasibility first

Dimensions, material, application. Those three are enough to start. A drawing makes it faster. We reply with TDS, MSDS and MOQ together.

grit@octud.com010-3338-2976
01Dimensions — OD / ID / wall, or Fr
02Material or required properties · tolerance
03Pressure rating · connector spec · expected volume
Support in Korean and English · drawings welcomeSend an inquiry