Catheter Bonding

Catheter bonding

Joins two parts into one catheter. Heat fusion and laser bonding melt the materials together, with no adhesive involved.

Published Linstant specsOfficial Korean distributor · local enquiries
Catheter bonding enquirySee specifications
Two black shafts showing the bonded joint

Characteristics

Advantages
Linstant published data
Heat fusion melts the materials together, leaving no adhesive residue
Laser bonding keeps the heat-affected zone narrow, which suits thin walls
PTFE joints are etched first as part of the same job

Specification

Specifications
Linstant source
Method
Heat fusion · laser bonding
Pre-treatment
PTFE must be etched first
Applies to
Like and unlike material joints

Tell us the two materials and the pull strength you need.

Application

Applications

Used to join hubs, tips and segments, or to reflow a liner onto an outer layer. If PTFE is involved, tell us whether it has been etched.

Same category

Same category
All tube processing →
Tip formingMarker bandInjection molding

FAQ

FAQ

Do you bond hubs to tubing?

Yes. Tube-to-hub, tube-to-tube and liner-to-jacket joints by thermal, UV and reflow processes.

Can I get bond strength results?

Tensile test results are attached on request.

Can I get the MSDS · TDS · biocompatibility report for Catheter Bonding?

Yes. TDS · MSDS come with every specification reply. ISO 10993 biocompatibility data varies by grade and lot, so we confirm it with the factory (Linstant) and reply.

What about samples, MOQ and lead time for Catheter Bonding?

Standard sizes start with small sample lots. MOQ and lead time depend on dimensions, material and secondary processing — send OD · ID · wall · tolerance · length · quantity and we reply within one business day.

Other items

Full index →
Precision Extruded TubingPrecision Extruded TubingBraided tubingBraided & Coil ReinforcedPI braided tubingPI Braided Reinforced SheathMedical Heat Shrink TubingMedical Heat Shrink TubingPEEK tubePEEK TubingPI Tubing (Polyimide)Polyimide TubingPTFE linerPTFE LinerUHMWPE linerPFAS-free PTFE ReplacementBalloon TubingBalloon TubingSteerable SheathSteerable SheathMicrocatheterMicrocatheterGuiding catheterGuiding CatheterAngiographic CatheterAngiographic CatheterNegative Pressure Access SheathNegative Pressure SheathEndoscope Insertion TubeEndoscope Insertion TubeFluoropolymer Medical TubingFluoropolymer Medical TubingHigh Pressure Braided TubingHigh Pressure Braided TubingBiopsy ChannelBiopsy Channel
Contact

Tell us your requirements
and we will narrow the item

Inner diameter, wall thickness, length and operating environment — those four settle the item. We reply with TDS, MSDS and MOQ.

grit@octud.com010-3338-2976
01Inner diameter · wall thickness · tolerance
02Length · color · surface treatment
03Application · expected volume · whether you need a TDS
Support in Korean and English · drawings welcomeSend an inquiry