PEBAX Heat Shrink Tubing

PEBAX Heat Shrink Tubing

PEBAX heat shrink keeps the 2:1 ratio but caps the wall at 0.25 mm, thinner than FEP or PE — for sections that need a large reduction and a thin wall at once.

Published Linstant specsOfficial Korean distributor · local enquiries
PEBAX heat shrink tubing enquirySee specifications
PEBAX heat shrink tubing — navy outer jacket

Characteristics

Advantages
Linstant published data
2:1 ratio with a 0.25 mm wall cap — large reduction and a thin wall together
Pre-shrink ID from 1.00 to 12.70 mm covers large bores
The 180 – 190 °C window is narrow, so process control matters

Specification

Specifications
Linstant source
Pre-shrink ID
1.00 – 12.70 mm
Pre-shrink wall
0.08 – 0.25 mm
Shrink ratio
2:1
Shrink temperature
180 – 190 °C

The shrink window is narrow — review heat source and dwell time together.

Application

Applications

Used for catheter outer jackets that need a large reduction with minimal OD gain. The narrow temperature window makes heat-source control important.

Same category

Same category
All heat shrink tubing →
PE Heat Shrink TubingFEP / S-FEP Heat Shrink TubingPET Heat Shrink Tubing

Other items

Full index →
Precision Extruded TubingPrecision Extruded TubingBraid Reinforced TubingBraided & Coil ReinforcedPI Braided Reinforced TubingPI Braided Reinforced SheathMedical Heat Shrink TubingMedical Heat Shrink TubingPEEK TubingPEEK TubingPI Tubing (Polyimide)Polyimide TubingPTFE LinerPTFE LinerUHMWPE LinerPFAS-free PTFE ReplacementBalloon TubingBalloon TubingSteerable SheathSteerable SheathMicrocatheterMicrocatheterGuiding CatheterGuiding CatheterAngiographic CatheterAngiographic CatheterSheath · DilatorSheath & DilatorNegative Pressure Access SheathNegative Pressure SheathGuidewireHydrophilic GuidewireEndoscope Insertion TubeEndoscope Insertion TubeFluoropolymer Medical TubingFluoropolymer Medical TubingHigh Pressure Braided TubingHigh Pressure Braided TubingBiopsy ChannelBiopsy Channel
Contact

Tell us your requirements
and we will narrow the item

Inner diameter, wall thickness, length and operating environment — those four settle the item. We reply with TDS, MSDS and MOQ.

Grit@octud.com010-3338-2976
01Inner diameter · wall thickness · tolerance
02Length · color · surface treatment
03Application · expected volume · whether you need a TDS
Support in Korean and English · drawings welcomeSend an inquiry