PEEK Printing Pre-Treatment

PEEK Printing Pre-Treatment

A pre-treatment that raises surface adhesion on PEEK tubing so print quality improves — graduations and markings stop rubbing off, with no change of material.

Published Linstant specsOfficial Korean distributor · local enquiries
PEEK printing pre-treatment enquirySee specifications
PEEK printing pre-treatment — three PEEK tubes with scale marks printed after pre-treatment

Characteristics

Advantages
Linstant published data
Chemical-free — no reagents are involved, which makes the process safer and more reliable
Ink strength is high

Specification

Specifications
Linstant source
Process
Chemical-free (no reagents)
Effect
Higher surface adhesion → better print quality
Ink strength
High
Applies to
PEEK tube

Send the print content and durability requirement and we set the process conditions.

Application

Applications

Used on PEEK tubing carrying graduations, lot numbers or orientation marks. After pre-treatment the print holds firmly through handling and cleaning.

Same category

Same category
All surface treatment →
PTFE etching · secondary etchingLaser Conformal

FAQ

FAQ

Why does ink not stick to PEEK?

PEEK has low surface energy. After pre-treatment it is printed with medical inks.

Pre-treatment and printing in one step?

Yes. Pre-treatment plus scale and logo printing are handled together.

Can I get the MSDS · TDS · biocompatibility report for PEEK Printing Pre-Treatment?

Yes. TDS · MSDS come with every specification reply. ISO 10993 biocompatibility data varies by grade and lot, so we confirm it with the factory (Linstant) and reply.

What about samples, MOQ and lead time for PEEK Printing Pre-Treatment?

Standard sizes start with small sample lots. MOQ and lead time depend on dimensions, material and secondary processing — send OD · ID · wall · tolerance · length · quantity and we reply within one business day.

Other items

Full index →
Precision Extruded TubingPrecision Extruded TubingBraided tubingBraided & Coil ReinforcedPI braided tubingPI Braided Reinforced SheathMedical Heat Shrink TubingMedical Heat Shrink TubingPEEK tubePEEK TubingPI Tubing (Polyimide)Polyimide TubingPTFE linerPTFE LinerUHMWPE linerPFAS-free PTFE ReplacementBalloon TubingBalloon TubingSteerable SheathSteerable SheathMicrocatheterMicrocatheterGuiding catheterGuiding CatheterAngiographic CatheterAngiographic CatheterNegative Pressure Access SheathNegative Pressure SheathEndoscope Insertion TubeEndoscope Insertion TubeFluoropolymer Medical TubingFluoropolymer Medical TubingHigh Pressure Braided TubingHigh Pressure Braided TubingBiopsy ChannelBiopsy Channel
Contact

Tell us your requirements
and we will narrow the item

Inner diameter, wall thickness, length and operating environment — those four settle the item. We reply with TDS, MSDS and MOQ.

grit@octud.com010-3338-2976
01Inner diameter · wall thickness · tolerance
02Length · color · surface treatment
03Application · expected volume · whether you need a TDS
Support in Korean and English · drawings welcomeSend an inquiry